Why Stamp "Drop Forged" on Tools?

People usually see the words "drop forged" stamped on so many tools. You may wonder what the big deal is! Why do manufacturers want you to know that a tool is drop forged?
If you have ever seen a blacksmith beating on a piece of red hot iron with a hammer, you have seen the simplest type of forging. Striking a piece of hot metal with a hammer is forging, and blacksmiths have been doing this for centuries. As blacksmiths experimented with new techniques, they learned that complex shapes could be created by hammering metal into a die. The die contains the shape of the finished product. Modern manufacturers use either a falling hammer or a powered hammer to do the hammering (rather than doing it by hand), and usually use dies on both sides of the piece. This is drop forging.

Manufacturers now use many different techniques to forge metal. Four of the most common include:

• Drop forging - Hammering hot metal into dies.
• Press forging - instead of forcing hot metal into a die with a hammer blow, it is pressed into the die with hydraulic pressure.
• Roll forging - The hot metal is pressed between two rollers.
• Cold forging - For smaller pieces, the metal can be pressed into the die without heating it significantly ahead of time.

The reason why drop forging manufacturers want you to know that a tool is drop forged is because this tells you something about the strength and durability of the tool. The other two ways to make a tool would be casting it from molten metal or machining it (cutting material away) from a larger block of metal. The advantage of forging is that it improves the strength of the metal by aligning and stretching the grain structure. A forged part will normally be stronger than a casting or a machined piece.